TRAX ATV - A-arms - Long Travel - Houser Long Travel A-arms Kawasaki KFX450R

Houser Long Travel A-arms - Kawasaki KFX450R	$849.95
Free Shipping!

Houser Long Travel A-arms - Kawasaki KFX450R

Houser Long Travel A-arms for the Kawasaki KFX450R.

If you are having trouble with the handling of your Kawasaki KFX450R, then you need to get the Houser Long Travel A-arms. We have changed the factory caster by changing the location of the upper ball joint. Your Kawasaki KFX450R will handle much better than the stock setup.

The Houser A-arm product lines for the Kawasaki KFX450R includes +.75 width a-arms for Cross Country Racing (XC) and +2.25 width a-arms for Motocross Racing (MX). The Houser Long Travel A-arms for the Kawasaki KFX450R are for the extreme rider or racer who wants to maneuver quickly through the woods or other tight areas.

With the needle bearing and seal design feature the bearing end of your a-arms will hold up to the dirty and watery atmosphere that you ride in. Long Travel shocks are a must for performance. Made from 4130 Chromoly Steel, fully TIG Welded, and Powder coated with a glossy finish that houses that HOUSER Logo, this a-arm set not only has the look, but it will hold up to anything that you can put it through.

Kawasaki KFX450R Houser Long Travel A-arms

Uses 18.25" shocks
4130 Chrome-moly steel
TIG welded construction
Replaceable plated ball joint (press in lowers) with nylon locknuts
Lightweight zinc plated chrome-moly tie rods
Houser designed pivot shafts and sleeves
Uses Needle Bearings
Adjustable camber
Threaded grease zerks
HOUSER logo powder coated onto A-Arms

Kawasaki KFX450R Houser Long Travel A-arm Kit
This kit includes:

Houser A-Arms - Long Travel
Powder Coated
Zinc plated chrome-moly tie-rods
Replaceable Sealed Ball Joints (set of 4)
Pivot Kit - Installed
Needle bearings, seals and dust caps
Hardware Kit
1 Year Manufacturer Limited Warranty

PLEASE NOTE:
Most swingarms, a-arms and shocks are built to order (built when an order is placed). Please allow up to 20 business days for these parts to ship. Most of the time these parts ship much sooner if not immediately but there are certain times of the year and certain products that may take up to and possibly more than the 20 business days to ship.

Be sure to answer all questions.

Choose Year

Please choose the correct year of the vehicle.

Choose Year:

Choose A-arm Finish

We offer the following finish options for these A-arms.

Choose A-arm Finish:

A-arm Configuration

Width: The wider your go, the more stable the quad becomes. The suspension also gains wheel travel when you widen the stance.

Forward: The forward position is determined from the stock location. Depending on the rider, bike and type of riding, some people want to change the forward position of the A-arms to help keep the front end down , balance the weight of the quad or add bite in a corner.

**ATTENTION RACERS - If you are purchasing A-arms for racing, be aware that +3 a-arms on most ATVs may put the width of your ATV over the regulation limit. If you are running negative offset front wheels (4+1) then you may be able to run +3 A-arms. Please be aware of the regulations, know your equipment and do your homework before ordering.

The following configurations are available for this ATV.

A-arm Configuration:

Quantity Kit

Here are a few other items to consider while upgrading to the Houser Long Travel A-arms.

Extended Brake Line Kit

Brake Line Clamps

Shocks

These Houser Long Travel A-arms may also be available for the following quads: ATK450, Can-Am DS450, Bombardier DS650, Honda 300EX, Honda 400EX, Honda TRX450R, Kawasaki KFX450R, Kawasaki KFX400, Suzuki LTZ400, Suzuki LT-R450, Predator 500, Yamaha Banshee, Yamaha Blaster, Yamaha Raptor 350, Yamaha Raptor 660, Yamaha Raptor 700, Yamaha YFZ450.