TRAX ATV - A-arms - Standard Travel - Houser SLICAST Std Travel A-arms Kawasaki KFX450R

Houser MGC SLICAST Standard Travel A-arms - Kawasaki KFX450R	$949.95
Free Shipping!

Houser MGC SLICAST Standard Travel A-arms - Kawasaki KFX450R

Houser MGC SLICAST Standard Travel A-arm for the Kawasaki KFX450R

Kawasaki KFX450R Houser MGC SLICAST Standard Travel A-arms
Features

Uses Standard travel shocks
4130 Chrome-moly steel
TIG welded construction
Replaceable plated ball joints with nylon locknuts
Lightweight zinc plated chrome-moly tie rods
Hardened thrust washers
Chrome dust covers with seals
Uses Needle Bearings
Adjustable camber and caster
Threaded grease zerks
HOUSER logo powder coated onto A-Arms

The Houser MGC SLICAST Standard Travel A-arms for the Kawasaki KFX450R are for the avid rider or racer, someone who wants to gain more width without investing in a long travel shock. We discovered during the design process that the Kawasaki KFX450R has decent stock shocks with a decent amount of travel already. Combine that with the Houser SLICAST or TricTrac features and your Kawasaki KFX450R will be ready to race. The Maximum Ground Clearance (MGC) Feature makes going over boulders, deep ruts, trees, roots, and any other rugged condition that the trail might bring, an easier task. Fine tuning your caster for each track is simple with the SLICAST ™ feature.

With the needle bearing and seal design feature the bearing end of your a-arms will hold up to the dirty and watery atmosphere that you ride in. Made from 4130 Chromoly Steel, fully TIG Welded, and Powder coated with a glossy finish that houses that HOUSER Logo, this a-arm set not only has the look, but it will hold up to anything that you can put it through.

Kawasaki KFX450R Houser MGC SLICAST Standard Travel A-Arm Kit
This kit includes the following items:

Houser MGC SLICAST Standard Travel A-arms
Coating Options - Powder Coat
Zinc Plated Chrome-moly Tie-Rods
Replaceable Sealed Ball Joints (set of 4)
Needle Bearing Kit - Installed
Hardware Kit
1 Year Manufacturer Limited Warranty

PLEASE NOTE:
Most swingarms, a-arms and shocks are built to order (built when an order is placed). Please allow up to 20 business days for these parts to ship. Most of the time these parts ship much sooner if not immediately but there are certain times of the year and certain products that may take up to and possibly more than the 20 business days to ship.

Choose Year

Please choose the correct year of the vehicle.

Choose Year:

A-arm Configuration

Width: The wider your go, the more stable the quad becomes. The suspension also gains wheel travel when you widen the stance.

Forward: The forward position is determined from the stock location. Depending on the rider, bike and type of riding, some people want to change the forward position of the A-arms to help keep the front end down , balance the weight of the quad or add bite in a corner.

**ATTENTION RACERS - If you are purchasing A-arms for racing, be aware that +3 a-arms on most ATVs may put the width of your ATV over the regulation limit. If you are running negative offset front wheels (4+1) then you may be able to run +3 A-arms. Please be aware of the regulations, know your equipment and do your homework before ordering.

The following configurations are available for this ATV.

A-arm Configuration:

Choose A-arm Finish

We offer the following finish options for these A-arms.

Choose A-arm Finish:

Quantity Kit

Here are a few other items to consider while upgrading to the Houser MGC SLICAST Standard Travel A-arms.

Extended Brake Line Kit

Brake Line Clamps

Shocks

These Houser MGC SLICAST Standard Travel A-arms may also be available for the following quads: ATK450, Can-Am DS450, Bombardier DS650, Honda 300EX, Honda 400EX, Honda TRX450R, Kawasaki KFX450R, Kawasaki KFX400, Suzuki LTZ400, Suzuki LT-R450, Predator 500, Yamaha Banshee, Yamaha Blaster, Yamaha Raptor 350, Yamaha Raptor 660, Yamaha Raptor 700, Yamaha YFZ450.