TRAX ATV - A-arms - Standard Travel - Houser Standard Travel A-arms Yamaha Raptor 700

Houser Standard Travel A-arms - Yamaha Raptor 700	List Price $575.00 TRAX Price $550.00 Savings $25.00 (4%)
Free Shipping!

Houser Standard Travel A-arms - Yamaha Raptor 700

Houser Standard Travel A-arms for the Yamaha Raptor 700.

Use the spec pages below to help you understand what features this product has. These Houser Standard Travel A-arms are for the Yamaha Raptor 700 rider or racer who is fast, someone that is looking to upgrade from the stock setup but not get a whole lot of money tied up in their upgrade. You can still be very competitive on these a-arms.

Adding width to your a-arms will add more wheel travel. Adjust your caster in 1/8” increments with the aluminum spacers by moving the spacers to the front or back of the upper a-arm. There is up to 5/8” of adjustment. With the bushing and sealed dust cap design feature the bearing end of your a-arms will hold up to the dirty and watery atmosphere that you ride in.

Yamaha Raptor 700 Houser Standard Travel A-arms

Uses stock length shocks
4130 Chrome-moly steel
TIG welded construction
Replaceable plated ball joint with nylon locknuts
Lightweight Chrome-moly tie rods
New! 5/8" diameter hardened and polished bearing sleeves
One piece delrin bushings
Adjustable camber
Adjustable caster using provided spacers
Threaded grease zerks
HOUSER logo powder coated onto A-Arms

Made from 4130 Chromoly Steel, fully TIG Welded, and Powder coated with a glossy finish that houses that HOUSER Logo, this a-arm set not only has the look, but it will hold up to anything that you can put it through.

Yamaha Raptor 700 Houser Standard Travel A-arm Kit
This kit includes the items needed to do a basic install. Here is what it includes:

Houser A-Arms - Standard Travel
Coating Options - Powder Coat
Chrome-moly Tie-Rods
Replaceable Sealed Ball Joints (set of 4)
Pivot Kit - Installed
Hardware Kit
1 Year Manufacturer Limited Warranty

PLEASE NOTE:
Most swingarms, a-arms and shocks are built to order (built when an order is placed). Please allow up to 20 business days for these parts to ship. Most of the time these parts ship much sooner if not immediately but there are certain times of the year and certain products that may take up to and possibly more than the 20 business days to ship.

Be sure to answer all questions.

Choose Year

Please choose the correct year of the vehicle.

Choose Year:

Choose Finish

Houser offers the following finishes for this product.

Standard Color is #29 Mirror Black. Click on the colors below to view larger samples.

#10

#11

#12

#13

#14

#15

#16

#17

#18

#19

#20

#21

#22

#23

#24

#25

#26

#27

#28

#29

#30

Choose Finish (Houser):

A-arm Configuration

Width: The wider your go, the more stable the quad becomes. The suspension also gains wheel travel when you widen the stance.

Forward: The forward position is determined from the stock location. Depending on the rider, bike and type of riding, some people want to change the forward position of the A-arms to help keep the front end down , balance the weight of the quad or add bite in a corner.

**ATTENTION RACERS - If you are purchasing A-arms for racing, be aware that +3 a-arms on most ATVs may put the width of your ATV over the regulation limit. If you are running negative offset front wheels (4+1) then you may be able to run +3 A-arms. Please be aware of the regulations, know your equipment and do your homework before ordering.

The following configurations are available for this ATV.

A-arm Configuration:

1" Interceptor Brake Line Clamps

~~ Special Offer - 2 pair for $30 ~~
(When purchased with this set of A-arms)

When we developed the Interceptor Clamps we decided to create a completely NEW and IMPROVED design rather than copying the industries standard, deficient, outdated brake line clamps.

FUNCTION
Where standard clamp designs use only one screw to fasten the clamps, the Interceptor design utilizes two stainless steel screws offering superior clamping power.

DURABILITY
Just like the Interceptor Body Armor used by the US Military, the Interceptor Clamps have a tough protective coating. Interceptor Brake Line Clamps are Hard Anodized which provides a much more durable and abrasion resistant coating than Standard Anodizing. This coating protects the clamps finish from harsh debris like sand and rocks. This means that your Interceptor Clamps will retain their awesome appearance, after even the hardest of rides. Hard Anodizing is used in industrial applications while Standard Anodizing is commonly used for cosmetic applications.

DESIGN
With a completely new and original design, the Interceptor Brake Line Clamps keep the brake lines close and secure to the a-arms, out of harms way.

~~ Special Offer - 2 pair for $30 ~~
(When purchased with this set of A-arms)

Interceptor Clamps:

Quantity Kit

Here are a few other items to consider while upgrading to the Houser Standard Travel A-arms.

Extended Brake Line Kit

Brake Line Clamps

Shocks

These Houser Standard Travel A-arms may also be available for the following quads: ATK450, Can-Am DS450, Bombardier DS650, Honda 300EX, Honda 400EX, Honda TRX450R, Kawasaki KFX450R, Kawasaki KFX400, Suzuki LTZ400, Suzuki LT-R450, Predator 500, Yamaha Banshee, Yamaha Blaster, Yamaha Raptor 350, Yamaha Raptor 660, Yamaha Raptor 700, Yamaha YFZ450.

| | |